Grade 10.9 Black M10 Half-Thread Bolt with Class 10 Nut

0 Sold

฿23 - ฿27

Quantity

Short Description

Grade 10.9 Black Hex Bolt M8 Pitch 1.25 Full Thread with Class 10 Nut. High-tensile hardened steel ideal for heavy machinery and structural work.

Product description
Dimensions per DIN 931 / DIN 933 Standard (Size M10)Note: "Full Thread" corresponds to DIN 933, while DIN 931 applies to Half Thread bolts.

1. Thread Diameter (d): 10 mm (M10)
  • Thread Pitch (P): 1.5 mm (Standard Metric Coarse Thread)
  • Width Across Flats (S): 17 mm (Requires a 17 mm wrench per DIN 931/933 / Note: ISO 4014/4017 standard is 16 mm)
  • Head Height (k): 6.4 mm
  • Nut Thickness (m): 8.0 mm (Per DIN 934 standard / ISO 4032 standard is 8.4 mm)
2. Mechanical Properties
  • Manufactured from quenched and tempered medium-carbon alloy steel.

Grade 10.9 Bolt:

  • Tensile Strength: Min. 1,040 MPa (N/mm²)
  • Yield Strength: Min. 940 MPa (N/mm²)
  • Hardness: 32 – 39 HRC

Class 10 Nut:

  • Proof Load Stress: Approx. 1,040 MPa (Engineered to match Grade 10.9 bolt tensile strength to prevent thread stripping)
    Recommended Applications Grade 10.9 bolts are classified as High-

Strength Bolts and are ideal for:

  • Automotive Components: Chassis mounts, suspension systems, undercarriages, and parts subjected to high shock or vibration.
  • Heavy Machinery: Motor mounts and machine frames enduring high torque and dynamic shear loads.
  • Structural Engineering: Steel structure connections requiring high-strength, reliable fastening.
Precautions

  • Corrosion Resistance: Black oxide finish provides only mild corrosion protection. It is not suitable for high-moisture or outdoor environments. For outdoor or wet applications, use Hot-Dip Galvanized or Zinc-Plated Grade 10.9 bolts, or apply grease/oil regularly to the connection.
  • Tightening Torque: Use a calibrated torque wrench to achieve optimal clamping force without over-stretching. The recommended tightening torque for M10 Grade 10.9 is approximately 70 – 79 Nm (depending on thread lubrication).
  • Grade Matching: Must be paired with Class 10 (or higher) nuts and hardened flat/spring washers. Never use lower-grade nuts (such as Class 8 or mild steel), as the nut threads will strip under high tension.


เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว and นโยบายคุกกี้
Powered By MakeWebEasy Logo MakeWebEasy